AdvertiseDonate
PortlandSeattleDallasJacksonvilleColumbusWashingtonBostonDetroit
Saturday, November 21, 2026Fresh headlines, all day.
Digital News Live · 70 SW Century Drive, Bend, OR 97702
News · Pensacola

St. Louis Fire Investigation: Aerial Waterway Detachment

Chief Dennis Jenkerson confirms a third-party investigator is examining a 2009 Smeal truck after its nozzle assembly broke free during a North City fire.

By Tomas Rahman ·

Illustration for: St. Louis Fire Investigation: Aerial Waterway Detachment
Illustration generated for this article, not a news photograph.

125. That is the maximum reach of the aerial ladders used by the St. Louis Fire Department, a height that made the Saturday night incident at Kingshighway and Terry particularly startling. The department is currently investigating a catastrophic failure where a water-carrying pipe and nozzle detached from a reserve truck while a firefighter was positioned at the top.

Fire Chief Dennis Jenkerson stated that the incident occurred during a second-alarm fire at a vacant church in North City. Hook and Ladder 6, assigned to the 6th District, arrived early and was operating a 2009 Smeal aerial ladder from the department’s reserve fleet. The on-scene commander ordered an aerial waterway deployed as the fire intensified. The crew raised the ladder, positioned the jacks, and connected the water supply. The firefighter at the top began to flow water and noticed the truck assembly starting to move away from the right side. He called for an immediate shutdown. Upon stopping the flow, the remaining assembly, including the master stream nozzle, fell away from the truck. No one was injured.

Jenkerson explained that the firefighter was clipped into a safety harness, which is standard procedure for ladders that reach 125 feet. He noted that the equipment is routinely tested and inspected. The department’s shop and the deputy chief in charge of equipment took photos at the scene. A third-party investigator is now examining the truck. Initial checks found no rust in the affected area and no broken ladder parts. Jenkerson said it appears the truck assembly that holds the aerial waterway broke away from the ladder. Investigators are determining whether bolts sheared or were loose.

The investigation is expected to last one to two months. Examiners will look at equipment failure and operational setup errors. The failed truck is out of service, and the department has another reserve unit available. The department’s shop has inspected all 125-foot aerial ladders in the days since the fire and has not found issues with the assemblies or bolts at this time. Every aerial ladder requires a third-party inspection every five years. The truck involved in Saturday’s fire recently passed this inspection, which covers structural integrity, outriggers, and the mainframe. Equipment is tested according to NFPA standards, including X-rays for cracks and rusting.

The National Institute for Occupational Safety and Health issued a safety advisory in 2008 after a fatality involving similar equipment. That report documented 10 occurrences of this type of failure in the United States. Jenkerson said he has experienced equipment failure early in his career. He was on a platform 75 feet off the ground when the end malfunctioned and dumped the platform sideways. His harness kept him secure. He noted that mechanical equipment does fail, and firefighters are trained to use their gear to protect themselves.

More News · Report a business · Got a Story?

Get Digital News Live in your inboxFresh headlines, all day. Free, a few times a week, unsubscribe any time.

Related stories

Get Digital News Live in your inboxFresh headlines, all day. Free, a few times a week, unsubscribe any time.