St. Louis Fire Chief Says No One Hurt as Ladder Nozzle Detached Mid-Fire
A third-party inspector is now examining the 2009 Smeal truck after its aerial waterway assembly broke free from the ladder during a second-alarm response in North City.
By Meera Fletcher ·

The St. Louis Fire Department is investigating a mechanical failure that occurred Saturday night when a water-carrying nozzle broke away from a ladder truck during an active fire.
Fire Chief Dennis Jenkerson confirmed that no firefighters were injured in the incident. The failure happened at a vacant church located at the intersection of Kingshighway and Terry in the North City neighborhood.
Hook and Ladder 6, assigned to the 6th District, was among the first units on scene for the second-alarm fire. The on-scene commander requested an aerial waterway as the flames intensified.
The crew was operating a reserve unit, a 2009 Smeal aerial ladder. They raised the apparatus, positioned the jacks, and connected the water supply line. As the firefighter at the top began to flow water, he noticed the truck assembly on the right side starting to move.
He ordered an immediate shutdown. Once the water flow stopped, the rest of the assembly, including the master stream nozzle, fell away from the truck.
Jenkerson stated that the firefighter was clipped into a safety harness, which is standard procedure for ladder work. The harness prevented the crew member from falling when the equipment shifted.
The department’s shop and the deputy chief in charge of equipment photographed the scene. A third-party investigator is currently examining the truck to determine the cause of the break.
Initial checks found no rust or breaks in the ladder itself. Jenkerson said the issue appears to be with the truck assembly that holds the aerial waterway. Investigators are looking into whether bolts sheared or if they were loose.
The investigation could take one to two months. Officials are reviewing both equipment failure and operational setup to answer remaining questions.
The department recently inspected all of its 125-foot aerial ladders. Chief Jenkerson said crews checked the assemblies and bolts but found no issues. The failed truck is now out of service, and the department has another reserve unit available.
Third-party inspections for these trucks are required every five years and cover structural integrity, outriggers, and the mainframe. The truck involved in Saturday’s incident passed a recent inspection. Equipment is tested and X-rayed for cracks and rusting according to NFPA standards.
Jenkerson noted that such failures are rare but do happen. In 2008, the National Institute for Occupational Safety and Health issued a safety advisory after a fatality, citing 10 documented occurrences of this specific equipment failure in the U.S.






